Setting Ranges For The Switching Outputs; Setting Ranges For The Window Function - HYDAC ELECTRONIC ETS 3000 Notice D'utilisation

ETS 3000
7.4

Setting Ranges for the Switching Outputs

Switching point
switching value
Integral
-23.0 .. 100.0 °C
sensor
(-10 .. 212 °F)
probe
External
- 27.0 .. 150.0 °C
sensor
(-17 .. 302 °F)
probe
* All of the ranges indicated in the table can be adjusted by the increments shown.
7.5

Setting Ranges for the window function

Lower switching
Integral
-23.0 .. 97.5 °C
sensor
(-10 .. 208 °F)
probe
External
- 27.0 .. 146.5 °C
sensor
(-17 .. 296 °F)
probe
* All of the ranges indicated in the table can be adjusted by the increments shown.
Status 17.08.2016
Hysteresis or
or upper lower switching
1.0 .. 123.5°C
(2 .. 222 °F)
1.0 .. 178.0 °C
(2 .. 320 °F)
value switching value
-22.0 .. 98.5°C
(-7 .. 209 °F)
-25.5 .. 148.0 °C
-14 .. 298 °F)
HYDAC ELECTRONIC GMBH
Increment*
value
0.5 °C
(1 °F)
0.5 °C
(1 °F)
Upper
Increment*
0.5 °C
(1 °F)
0.5 °C
(1 °F)
Page 8
Part No.. 669859