Ordering Details; Ets 3000 With Integral Sensor Probe - HYDAC ELECTRONIC ETS 3000 Notice D'utilisation

ETS 3000
13.

Ordering Details

13.1

ETS 3000 with Integral Sensor Probe

Model
2 = with integrated temperature sensor
Connection type, mechanical
2 = G1/2 A male thread G1/2 A ISO 1179-2
Connection type, electrical
6 = 4-pole M12x1
Possible only on output models 2 and 3
(connector not included)
8 = 5-pole M12x1
Possible only on output model 5
(connector not included)
Output
2 = 2 switching outputs
(available only in conjunction with electrical connection type 6)
3 = 1 switching output and 1 analogue output
(available only in conjunction with electrical connection type 6)
5 = 2 switching outputs and 1 analogue output
(available only in conjunction with electrical connection type 8)
Sensor probe length
018 = probe length: 18 mm
100 = probe length: 100 mm
250 = probe length: 250 mm
350 = probe length: 350 mm
Modification number
000 = Standard
000 = standard (set by manufacturer)
400 = Standard in °F
400 = sensor probe length in inches
Items supplied:
1x ETS 322X-X-XXX-000
1 x manual
Status 17.08.2016
ETS 3 2 2 X - X - XXX - XXX
HYDAC ELECTRONIC GMBH
Page 16
Part No.. 669859