Technical Specifications; Ets 3000 With Integral Sensor Probe - HYDAC ELECTRONIC ETS 3000 Notice D'utilisation

ETS 3000
12.

Technical Specifications

12.1

ETS 3000 with Integral Sensor Probe

Input data
Measuring range
Probe length
Probe diameter
Pressure resistance
Hydraulic connection
Tightening torque, recommended
Components in contact with fluid
Output data
Switching outputs
Analogue output, permitted load resistance
Accuracy (at room temperature)
Temperature drift (ambient)
Rise time to DIN EN 60751
Repeatability
Environmental conditions
Operating temperature range
Storage temperature range
Fluid temperature range
- mark
2)
-mark
Vibration resistance to
DIN EN 60068-2-6 (10 .. 500 Hz)
Shock resistance to
DIN EN 60068-2-27 (11 ms)
Protection class to DIN EN 60529
Other data
Supply voltage
for use acc. to UL spec.
Residual ripple of supply voltage
Current consumption
Display
Weight
Note: Reverse polarity protection of the supply voltage, excess voltage, override,
short circuit protection are provided.
1)
-25°C with FPM seal, -40°C on request.
2)
Environmental conditions to 1.4.2 UL 61010-1; C22.2 No. 61010-1
3)
with mounted coupling box with appropriate protection
Status 17.08.2016
mm
mm
bar
psi
t :
50
t :
90
1)
3)
g
FS (Full Scale) = in relation to the full measurement range
HYDAC ELECTRONIC GMBH
-25 .. 100 °C (-13 .. 212 °F)
18 100
6 8
600 50
8700 725
G1/2 A ISO 1179-2
45 Nm
Mech. connection: Stainless steel; Seal: FPM
1 or 2 PNP transistor outputs
Switching current: max. 1,2 A per output
Switching cycles: > 100 million
Selectable:
4 .. 20 mA ohmic resistance max. 500 Ω
0 .. 10 V ohmic resistance min. 1 kΩ
≤ ± 1.0 °C (≤ ± 2.0 °F)
≤ ± 0.015 % FS / °C (≤ ± 0.0085 % FS / °F)
3 s 8 s
9 s 15 s
≤ ± 0.25 % FS max.
-25 .. + 80 °C (-13 .. 176 °F)
(-25 .. +60 °C [ -13 .. +140 °F] acc. to UL-spez.)
-40 .. + 80 °C (-40 .. 176 °F)
-40 .. + 100°C / -25 .. 100 °C
(-40 .. 212 °F / -13 .. 212 °F)
EN 61000-6-1 / 2 / 3 / 4
Certifikat-No.: E318391
≤ 10 g
≤ 50 g
IP 67
9 .. 35 V DC without analogue output
18 .. 35 V DC with analogue output
- limited energy- acc. to 9.3 UL 61010; Class 2;
UL 1310/1585; LPS UL 60950
≤ 5 %
max. 2.455 A total
max. 35 mA with inactive switching output
max. 55 mA with inactive switching output
and analogue output
4-digit, LED, 7-segment, red
Character height: 7 mm
̴ 135 ̴ 150
Page 14
250 350
8 8
50 50
725 725
8 s 8 s
15 s 15 s
̴ 185 ̴ 210
Part No.. 669859