HYDAC ELECTRONIC ETS 3000 Notice D'utilisation page 35

ETS 3000
Setting
Display filter (Display)
Display reacts slowly to temperature
fluctuations
Display reacts normally to temperature
fluctuations
Display reacts quickly to temperature
fluctuations
Setting the indication range (RANGE)
The temperature is shown in °C.
The temperature is shown in °F.
When switching between °C and °F the ETS 3000
automatically converts the switching settings to the newly
selected scale.
Analogue output (Output):
The analogue output supplies a
4–20 mA signal
The analogue output supplies a
0–10 V signal
Version number (Version)
Displays the current software version. (View only)
To exit the Basic Settings menu (End)
Closes the Basic Settings menu.
Further changes can be made to the
basic settings.
If any basic settings have been changed, PRoG appears briefly in the display
as soon as the Basic Settings menu is closed, and then the value selected for
primary display is shown.
Status 17.08.2016
HYDAC ELECTRONIC GMBH
Display Setting
range
SLOW/
MEDI/
FAST
°C/
°F
MAMP/
VOLT
YES/ NO
Page 11
Initial
(default)
setting
MEDI
°C
MAMP
NO
Part No.. 669859