Mettler Toledo IND570 Manuel D'installation page 44

M. Tighten the cable gland. Figure 2-17 shows the completed assembly.
Figure 2-17: Front Panel and Load Cell Connection Reversed
4. Mark the position of the mounting holes on the vertical surface per the dimensions shown in
Figure 2-18 and in Figure 2-19 or by holding the terminal up to the surface and marking
through the bracket holes.
Figure 2-18: VESA 100 x 100mm Wall Bracket Mounting Hole Pattern (In IND570 terminals
manufactured after April, 2016)
30205319 | 11 | 07/2019 METTLER TOLEDO IND570 Terminal Installation Manual 2-11