Mettler Toledo IND570 Manuel D'installation page 59

14. Slide the plastic grommet down the cable, and fit it into the gland. The end of the plastic
15. Unbraid the individual strands of the inner braided shield.
16. Fold the individual strands of the inner braided shield back over the grommet. The individual
2-26 METTLER TOLEDO IND570 Terminal Installation Manual
Clamping features
Figure 2-41: Outer Portion of Cable Gland Installed on Cable
grommet should align with the end of the cable jacket.
Figure 2-42: Plastic Grommet Positioned in Gland
strands should be uniformly distributed around the outer surface of the grommet.
Figure 2-44: Inner Braided Shield Folded Back over Grommet
O-ring
Figure 2-43: Inner Shield Unbraided
Outer drain wire
End of cable jacket
Plastic grommet
30205319 | 11 | 07/2019