Mettler Toledo IND570 Manuel D'installation page 42

30205319 | 11 | 07/2019
Ground wire connected
to ground stud
Figure 2-13: Original Location of Power Cord
E. Loosen the cable gland nut and remove the gland and cord from the enclosure.
F. Loosen and remove the two nuts securing the two grounding straps (these also operate as
hinges for the front cover) to the rear housing. See Figure 2-14.
Figure 2-14: Loosening the Ground Straps
METTLER TOLEDO IND570 Terminal Installation Manual
Cable gland
Cable tie and
ferrite
Ground strap
connections
2-9