Mettler Toledo IND570 Manuel D'installation page 32

•
•
•
•
1-24 METTLER TOLEDO IND570 Terminal Installation Manual
The middle portion of the display is reserved for the weight display. If the auxiliary display is
enabled, this area of the display is shared between the weight display and the selection for
auxiliary display (Figure 1-11, Figure 1-12, Figure 1-13). Random data entry is also shown in
the bottom of this area.
Figure 1-11: Small Material Transfer SmartTrac Enabled
o SmartTrac is one of the available options for the auxiliary display. If SmartTrac is disabled,
the weight display area can be shared with the Rate display (Figure 1-12) or DIO status
display (Figure 1-13Figure 1-13).
The Tare display is designed to show the current Tare value and type (pushbutton or preset).
The Tare display can be separately enabled and disabled in Setup.
The Legend display area provides the user with current operational information such as center
of zero status, gross or net mode, etc.
The very bottom of the physical display area is reserved for showing the graphic labels (icons)
for the softkeys. Display positions for up to five softkey icons are provided. Chapter 2,
Figure 1-12: Rate Display
Figure 1-13: DIO Status Display
30205319 | 11| 07/2019