Mettler Toledo IND570 Manuel D'installation page 27

1.9.2. Ethernet Option
The Ethernet option provides a TCP/IP port that can be used to transmit demand templates,
continuous data, for direct access to data via a shared data server, to send email alerts and
terminal status information, and FTP transfer of tare and target tables and complete setup files. It
also provides a connection for backup and restore of the terminal's configuration using the
METTLER TOLEDO InSite
The Ethernet port offers access to the IND570 Webserver via a customer's local network.
1.9.3. COM2/COM3 Serial Ports
Options for additional serial ports include a stand-alone COM2/COM3 option and COM2/COM3
bundled with discrete I/O. Only one option can be used at a time.
COM2 supports an RS-232 connection at communication rates from 300 to 115.2k baud.
COM3 supports an RS-232, RS-422, or RS-485 connection at communication rates from 300 to
115.2k baud.
The serial/discrete I/O combination option includes 2 discrete inputs and 5 discrete outputs. Refer to
section 1.9.1 Discrete I/O,above, for details.
1.9.4. WiFi (dual band 2.4/5 GHz)
Two field installed option kits are available to add WiFi connectivity to the IND570. The kits convert
the USB port to WiFi using an "external" module. One kit is to be installed inside the harsh
enclosure (with antenna access through a plastic housing and the other is intended for remote
mounting for either the harsh or the panel enclosure.
The WiFi module does not reproduce the full functions of an IND570's wired Ethernet connection.
The WiFi options provide the following connection types:
30205319 | 11 | 07/2019
INTERNAL OR EXTERNAL DISCRETE I/O OPTIONS WITH DRY CONTACT RELAYS MUST NOT BE
USED IN AREAS CLASSIFIED AS HAZARDOUS DUE TO THE PRESENCE OF COMBUSTIBLE OR
EXPLOSIVE ATMOSPHERES. FAILURE TO COMPLY WITH THIS WARNING COULD RESULT IN
BODILY HARM AND/OR PROPERTY DAMAGE.

SL program.
If the Ethernet and the WiFi options are both installed, the WiFi option will be disabled. Only
one of these interfaces can be installed.
• Demand output
• Remote display (full capability in the remote terminal only)
•
SICS host
•
FTP
•
Shared data server access
If the Ethernet and the WiFi options are both installed, the WiFi option will be disabled. Only
one of these interfaces can be installed.
WARNING
METTLER TOLEDO IND570 Terminal Installation Manual 1-19