Mettler Toledo IND570 Manuel D'installation page 14

Interface and Function
Update Rates (max) –
POWERCELL terminal
versions
Keypad
Communication
WiFi
1-6 METTLER TOLEDO IND570 Terminal Installation Manual
IND570 Specifications
Weight display: 10 Hz
Internal discrete I/O: 50 Hz
External discrete I/O (ARM100): 25 Hz
PLC cyclic data: 20 Hz
SICS continuous (SIR): 20 Hz (15 Hz when update rate is 15 Hz)
MT Continuous Output: 20 Hz (15 Hz when update rate is 15 Hz)
Continuous Template (serial): 20 Hz (19.2-115.2Kbaud), 14 Hz (9600 baud) (15 Hz when
update rate is 15 Hz)
Continuous Template (Eprint): 10 Hz
26 keys; 1.22-mm thick polyester overlay (PET) with polycarbonate display lens. IND570xx
version provides an additional 1-mm thick clear polyester overlay (PET) in front of the
polycarbonate display lens
Standard Interfaces
Serial Port: COM1 (RS-232/RS-422/RS-485), 300 to 115,200 baud (isolated, in POWERCELL
models)
Serial Port: COM4 (POWERCELL models only) RS-232, 300 to 115,200 baud
USB Host Port: Type A connector, +5V at 100mA for connected devices (not certified for use in
hazardous areas)
Optional Interfaces
Ethernet Port: Ethernet 10 base-T / 100 base TX
COM2 serial port: RS-232, 300 to 115,200 baud
COM3 serial port: RS-232/RS-422/RS-485, 300 to 115,200 baud
WiFi (WLAN, dual band, 2.4 and 5 GHz)
Supported Protocols
USB Inputs: ASCII characters (barcode, keyboard), on-demand file import
USB Outputs: Demand output, Report printing, on-demand file export
Serial Inputs: ASCII characters, ASCII commands for CTPZ (Clear, Tare, Print, Zero), SICS (level
0 and level 1, some support for level 2 commands), Remote Display, Shared Data Server
access
Serial Outputs: Continuous and Demand outputs, SICS host protocol, report printing, interfaces
with external ARM100 Remote Input/Output modules. Optional COM-570 Application Software
available for legacy serial protocols.
Ethernet Inputs: ASCII commands for CTPZ (Clear, Tare, Print, Zero), SICS (level 0 and level 1,
some support for level 2 commands), Remote Display, Shared Data Server Access
Ethernet Outputs: Continuous and Demand Outputs, report printing
WiFi Inputs: Remote Display, SICS host protocol, Shared Data Server Access, FTP
WiFi Outputs: Demand output
PLC Interfaces
A single interface supported: Analog output, ControlNet, DeviceNet, EtherNet/IP, Modbus TCP,
PROFIBUS DP, PROFINET
Bands Dual-band, 2.4 and 5 GHz
WiFi Standards IEEE 802.11a/b/g/n
WiFi Output Power Max. 15 dBm
Transmission Range Up to 150 m (500 ft)
30205319 | 11| 07/2019