Mettler Toledo IND570 Manuel D'installation page 56

6. Press ENTER
7. At the terminal, press the SCAN softkey
8. When the scan completes, a list will appear showing all available CFS platforms. An asterisk
9. Use the UP and DOWN keys to select the desired CFS, and press OK to pair it. An exclamation
2.4.5.5. Vehicle System Connections, POWERCELL
TO AVOID DAMAGE TO THE PCB OR LOAD CELL, REMOVE POWER FROM THE TERMINAL AND WAIT AT LEAST 30
SECONDS BEFORE CONNECTING OR DISCONNECTING ANY HARNESS.
30205319 | 11 | 07/2019
on the CFS Bluetooth Module. This puts the module into its fast-pairing wait
state.
(*) after the platform's name indicates that it is ready to be paired.
mark will appear after the paired platform's MAC address, indicating that it is now paired with
the terminal.
Figure 2-37: Bluetooth View Showing Paired Platform MAC Address
DO NOT INSTALL THE IND570 TERMINAL IN AREAS CLASSIFIED AS HAZARDOUS BECAUSE OF
COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES. CONTACT AN AUTHORIZED METTLER TOLEDO
REPRESENTATIVE FOR INFORMATION ABOUT HAZARDOUS AREA APPLICATIONS.
Figure 2-36: CFS Bluetooth Module
. A message will display – "Waiting."
NOTICE
WARNING
METTLER TOLEDO IND570 Terminal Installation Manual 2-23