Getting Started - Unpacking; Items Supplied; Additional Accessories - Evolution R185 CMS-Li Notice Originale

www.evolutionpowertools.com
Check particularly the operation of all the machines
safety features before attempting to operate the
machine.

GETTING STARTED - UNPACKING

Caution: This packaging contains sharp objects. Take
care when unpacking. Remove the machine, together
with the accessories supplied from the packaging.
Check carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete. If any parts are found to be missing,
the machine and its accessories should be returned
together in their original packaging to the retailer. Do
not throw the packaging away; keep it safe throughout
the guarantee period. Dispose of the packaging in an
environmentally responsible manner.
Recycle if possible. Do not let children play with empty

ITEMS SUPPLIED

ITEM
Mitre Saw
Instruction Manual
Multi-material TCT Blade
Top Hold Down Clamp
6mm Blade Change Allen Key
Dust bag
Dust port adaptor
2Ah Battery
4Ah Battery
5Ah Battery
8Ah Battery
Single dock charger
Double dock charger

ADDITIONAL ACCESSORIES

In addition to the standard items supplied with this
machine the following accessories are also available from
the Evolution online shop at www.evolutionpowertools.
com or from your local retailer.
Description
Multi-material TCT Blade RAGEBLADE185MULTI
General wood blade
If you intend to store a battery for a period without
use then store battery at room temperature (0°C
to 20°C) When storing for very long periods boost
charge the battery once per year to prevent over
discharge. The Ambient temperature range for
tool and battery use: 0°C to 40°C. The charging
temperature: 5°C to 40°C.
plastic bags due to the risk of suffocation.
SERIAL NO. / BATCH CODE
Note: The serial number can be found on the motor
housing of the machine. For instructions on how to
identify the batch code, please contact the Evolution
Power Tools helpline or go to:
www.evolutionpowertools.com
088-0001, 088-0004
RECOMMENDED BATTERIES/CHARGERS
Description
2Ah Battery
4Ah Battery
Part No
5Ah Battery
8Ah Battery
GW185TCT-24
R18RCH-Li1-
Single dock charger
R18RCH-Li2 -
Double dock
charger
Note: The use of 2Ah batteries is not recommended on
this machine. Although a 2Ah battery will fit and run
the machine safely, the demand from the machine may
reduce battery life.
9
088-0001A, 088-0001B,
088-0001C, 088-0004A
Part No
R18BAT-Li2,
EBAT18-Li-2
R20BAT-Li2
R18BAT-Li4, EBAT18-Li-4,
R20BAT-Li4 EHPB18-Li-4
R18BAT-Li5,
EBAT18-Li-5
R20BAT-Li5
R18BAT-Li8,
EHPB18-Li-8
R20BAT-Li8
R18RCH-Li1,
EFC18-Li
R20RCH-Li1
R18RCH-Li2,
EMC18-Li
R20RCH-Li2
EN