Cleaning; Draining; Checking The Fan Filter - JUKI MEB-3200 Manuel D'utilisation

(10) Cleaning

DANGER :
Be sure carry out the work while observing the following in order to protect against pinching of
hands, fingers and arms between the sewing machine and the bottom cover, which can result in
serious injury, when you raise the sewing machine from its home position.
• Be sure to lock the hinge stopper to firmly secure the sewing machine in its raised position.
* Read and check how to rise/return the sewing machine described on p.3 to p.5.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.

(11) Draining

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.

(12) Checking the fan filter

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Be sure to remove thread waste or dust collected
snce the thread waste may be sewn together wth
the sewng product.
When polyethylene oler 1 under the bottom cover
becomes filled with oil, remove it and drain the oil.
1
1
1) Pull screen kt 1 n the drecton of the arrow to
1
2) Wash filter 2 under runnng water.
3) Reinstall filter 2 and screen kt 1 n place.
2
For J/C types, thread waste occurs every
time of sewing since the short thread
remaining function works.
Perform cleaning of the machine once in
half a day to a day.
Clean filter 2 of the control box fan once
every week.
remove t.
WARNING :
Be sure to fully dry and install the filter af-
ter washing it.