JUKI MEB-3200 Manuel D'utilisation page 79

Others
Name of part
Foot pedal swtch (asm.)
Shape and
application
Operation of the sewing machine
is performed by foot pedal.
Part No.
M85905130AA
■ Installing the optional foot pedal
CN71
J71
The cable is used to connect
pedal switch (asm.).
1
2
CN73
4
3
J73
Pedal swtch cable (asm.)
M90146200A0
Hand switch is provided with S type and J
type as standard. When using the optional
foot switch, pedal switch cable (asm.) is
necessary.
1) Loosen five setscrews and remove cover 1
located at the rear of the machne head.
2) Remove CN71 and CN73 on the CONNECTOR
crcut board.
3) Connect pedal swtch (asm.) 3 and pedal swtch
cable (asm.) 4 , and nsert the cable to J73 on
the CONNECTOR crcut board.
4) Connect ground wre 2 of the pedal swtch (asm.)
3 to the machne head.
5) Fx the cord wth the cable clp band together wth
other cords.
Drive and start of the presser can be
performed with the foot switch.
Operation with the hand switch cannot be
performed.
Hand swtch (asm.)
Button switch
32076655