Exchanging Gauge Parts - JUKI MEB-3200 Manuel D'utilisation

(2) Exchanging gauge parts

Throat plate
Throat plate A
Name of part
(Standard) [S, R] (For semi-wide width) (For wide width)
Needle size
Gimp position W 1.3 mm
Shape
32042715
Part No.
(32042707)
Type
Throat plate JA
Name of part
(Standard) [J]
Needle size
#120 to #130
Gimp position W
1.3 mm
Shape
32043424
Part No.
(32043416)
(32043408)
Type
* Part Nos. with ( ) parentheses can be used.
Presser set
Name Eyelet buttonhole compensating
of part presser S set
Shape
32028458
Part
No.
(The mark in [ ] parentheses shows the standard equipment for each type.)
Throat plate B Throat plate C
#90 to #110
1.8 mm 2.4 mm
W
32042913 32043010
(32042905) (32043002)
For S and R types
Throat plate JB Throat plate JC
(For semi-wide width) (For wide width)
#90 to #110
1.8 mm 2.4 mm
32042830 32043135
(32042822) (32043127)
(32042814) (32043119)
For J and C types
Eyelet buttonhole compensating
presser M set
[ C ]
32028854
For J and C types
Throat plate D Throat plate TE
(For narrow width) (Standard) [T]
#100 to #110
1.1 mm Without
32043218 32043713
(32043200) (32043705)
For T type
Throat plate JD Throat plate JE
(For narrow width) (Standard) [C]
#90 to #100 #110 to #120
1.1 mm 1.3 mm
W
32043622 32043523
(32043614) (32043515)
(32043606) (32043507)
Eyelet buttonhole compensating
presser L set ＊
[ J ]
＊ When L set is used, cloth cutting plate A, part
No. 32068702 is separately necessary.
Throat plate JF
(For narrow width)
#90 to #100
1.3 mm
32043325
(32043317)
(32043309)
32029050
61