JUKI MEB-3200 Manuel D'utilisation page 22

■ Lubricating the looper and spreader components
DANGER :
Be sure carry out the work while observing the following in order to protect against pinching of
hands, fingers and arms between the sewing machine and the bottom cover, which can result in
serious injury, when you raise the sewing machine from its home position.
• Be sure to lock the hinge stopper to firmly secure the sewing machine in its raised position.
* Read and check how to rise/return the sewing machine described on p.3 to p.5.
Front
6
Rear

5
3
4
2
1) Remove the presser plates, left and rght, and
rase the machne head.
2) Apply two to three drops of ol to looper lnk 1 ,
spreader lnk 2 , spreader, rght 3 , spreader,
5
left 4 and spreader actuatng cam 5 .
1. Be sure to lubricate the components
o n c e a d a y. I f t h e f r e q u e n c y o f
lubrication is small, especially, worn-
out of 3 , 4 and 5 is caused and
stitch skipping or needle breakage
will occur.
2. Apply oil to the oil wicks and the
1
felts (looper cam oiling felt 6 or
the like) in the machine bed at the
time of delivery or after an extended
period of disuse.