MBM CMFE Série Manuel D'utilisation page 55

WASTE DISPOSAL
Deactivation and scrapping of appliance
OBLIGATION OF DISPOSING OF MATERIALS USING THE LEGISLATIVE PROCEDURE IN FORCE IN
THE COUNTRY WHERE THE APPLIANCE IS SCRAPPED.
PURSUANT TO the directives (see section no. 0.1) relating to the reduction of use of the hazardous sub-
stances in the electrical and electronic appliance and to the waste disposal. The symbol of the barred waste
bin carried on the appliance or its packaging indicates that the product at the end of its useful life it must be
disposed of separately from other waste.
Sorted waste disposal of products at the end of their useful life is organised and managed by the manufacturer.
The user should dispose of this equipment contacting the manufacturer and following the system adopted by
the latter to allow the separate collection of the equiment at the end of its service life. Appropriate separate
collection for subsequent start-up of equipment assigned to recycling, treatment and disposal that is environ-
mentally compatible contributes to avoiding possible negative effects on the environment and on health and
promotes the reuse and/or recycling of the materials of which the equipment is composed. If the holder of this
product disposes of it illegally, this involves the application of administrative sanctions provided by the laws in
force.
Specialised personnel is in charge of deactivation and scrapping of the appliance.
Waste disposal
During operation and maintenance, do not disperse pollutants (oils, grease, etc.) into the en-
vironment and perform differentiated waste disposal depending on the composition of the
different materials and in compliance with relevant laws in force.
Illegal waste disposal will be prosecuted by laws in force in the territory where the violation has been ascer-
tained.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 27 - 27