Web Application; Access Data - Porsche Mobile Charger Plus Mode D'emploi

f Please see chapter "Opening the charger's
web application" on page 15.
f Refer to the operating instructions of the PLC
modem.
Connecting the charger to the energy manager
Connecting on the charger
Once the charger has connected to the PLC network,
it attempts to connect to the energy manager in open
mode.
b The charger has established a PLC connection.
b The charger and energy manager are in the same
PLC network.
– The energy manager is known (Status 3):
No action is necessary. The charger automatically
connects to the energy manager.
– The energy manager is unknown (Status 4):
– Add the charger as an EEBus device in
the web application of the energy manager.
E
If the light indicator lights
NERGY MANAGER
up green, the energy manager is connected
(Status 5). The energy manager settings
(e.g. charging current, overload protection and
optimized charging) are applied to the charger.
f Connection to the charger is described in the
section "Adding an EEBus device" in the web
application instructions of the Porsche Home
Energy Manager.
f Refer to the operating instructions of the energy
manager.
Connecting in the charger's web application
If the charger is in private mode, an unknown energy
manager must be added in the charger's web
application (Connections > Energy manager).
f For notes on the web application, see the
instructions at https://www.porsche.com/
international/aboutporsche/e-performance/
help-and-contact/.
For other languages, select the desired country
version of the website.
Reconnecting to the energy manager
If the energy manager charge status is activated, the
charger automatically attempts to connect to the
most recently used PLC network.

Web application

Opening the charger's web application
b The charger is connected to the PLC network
e Enter the hostname of the charger (<Hostname>
or <Hostname>/) in the browser address bar.
The hostname is in the letter containing access
data.
– or –
Enter the IP address of the charger in the browser
address bar. The IP address was assigned by
the DHCP server when your device and the
charger were paired, and can be seen in your
router settings.
f Please see chapter "Connecting the charger to a
PLC network" on page 14.
f For notes on the web application, see the
instructions at https://www.porsche.com/
international/aboutporsche/e-performance/
help-and-contact/.
For other languages, select the desired country
version of the website.
f For information on the hostname Please see
chapter "Access data" on page 15.
Operating instructions

Access data

A letter containing access data, with all the data you
need for the charger and web application, is supplied
with your charger.
e Keep this letter in a safe place.
Information
If you lose access data that is valid on delivery,
such as the initial password, please contact your
authorized Porsche dealer.
– Have the serial number of the charger ready.
f Please see chapter "Serial number of the charger"
on page 16.
The letter containing access data contains the
following information:
Designation Meaning
Serialnumber Serial number of the charger
Security ID For a secure connection to
the PLC modem
MAC MAC address of PLC interface to
home network
Web password Initial password of web
application
Web Hostname For connecting to the web
application via a browser
PUK Personal unlocking key
(security field)
PUK
The PUK is used to reactivate the initial password.
e If you lose or forget the PUK, contact an
authorized Porsche dealer.
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHT
THA
15