Control Unit - Porsche Mobile Charger Plus Mode D'emploi

Operating instructions
Disconnecting the supply cable
US
FC
ESM
PTB
TR
RU
UK
Fig. 7: Disconnecting cables
b Charging of the high-voltage battery has ended
VIE
and the vehicle cable has been removed from
the vehicle charge port.
b The plug has been disconnected from the
HE
electrical socket.
1. Remove screw C using a suitable tool.
2. Fully open the cover A.
AR
3. Pull out the plug B until resistance is first felt.
4. Close the cover A to about 15 degrees (the cover
JPN
can be in contact with plug B).
5. Pull out the plug B fully.
KOR
CHT
THA
10
Securing the supply cable
Fig. 8: Securing cables and plugs
1. Open the cover A by about 15 degrees (just far
enough that the plug B fits in the control unit).
2. Insert the plug B into the control unit until
resistance is first felt.
3. Fully open the cover A.
4. Push in the plug B fully.
5. Close the cover A fully and fasten with screw C.

Control unit

Fig. 9: Control unit
C button with 50 % and 100 %
HARGE STATUS
A
light indicators
E light indicator
NERGY MANAGER
B
H light indicator
OUSE CONNECTION
C
V light indicator
EHICLE
D
C light indicator
HARGER
E
M
ULTIFUNCTION BUTTON
F