General Information; Laser Class; Cfr 21, § 1040 (Fda) - Hilti PD-I Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
PD-I laser range meter
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the PD-I laser range meter.
Parts, operating controls and indicators 1
Rear contact surface
@
Reference indicator LED for rear contact
;
Left arrow button
Page
=
"Menu" button
19
%
"Measure" button
20
&
Graphic display
21
(
Reference indicator LED for front contact
22
)
On/off button
22
+
Right arrow button
23
§
Wrist strap attachment point
26
/
Delete (clear) button
33
:
¹/₄" thread for PDA 72 measuring extension
34
·
34
Folding spike
35 $
Laser emitting and receiving lens
36
£
¹/₄" thread on the underside
|
1.2 Explanation of the pictograms and other
information
Symbols
Read the Return waste
operating
instructions
before use.

Laser Class

2
Laser class II
material for according to
recycling. CFR 21, § 1040
(FDA)
en
19