Table Des Matières; General Information - Hilti PD-E Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
PD-E laser range meter
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents
1 General information
2 Description
3 Accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 FCC statement (applicable in US) / IC
statement (applicable in Canada)

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
All manuals and user guides at all-guides.com
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the PD-E laser range meter.
Parts, operating controls and indicators 1
@
;
Page
=
1
%
2
&
3
(
4
)
5
+
6
§
9
/
16
:
17
·
17
18 $
£
18
|
¡
Q
1.2 Explanation of the pictograms and other
Symbols
Read the
operating
instructions
before use.
Laser Class
Rear contact surface
Reference indicator LED for rear contact
Left arrow button
"Menu" button
"Measure" button
Graphic display
Reference indicator LED for front contact
Side "Measure" button
On/off button
Right arrow button
Wrist strap attachment point
Delete (clear) button
¹/₄" thread for PDA 72 measuring extension
Folding spike
Laser emitting and receiving lens
Optical sight
¹/₄" thread on the underside
information
Return waste
material for
recycling.
KCC-REM-
2 HLT-PD-E
en
Laser class II
according to
CFR 21, § 1040
(FDA)
1