General Information - Hilti PS 50 Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
PS 50 multidetector
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents

1 General information

2 Description
3 Technical data
4 Safety instructions
5 Description of the system
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty
12 FCC statement (for USA only)
13 IC statement (for Canada only)
14 EC declaration of conformity (original)
1 These numbers refer to the illustrations. You can
find the illustrations at the beginning of the operating
instructions.
In these operating instructions, the designation "the tool"
always refers to the PS 50 Multidetector.
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
All manuals and user guides at all-guides.com
Parts and operating controls 1
@
;
=
%
&
(
)
+
§
Page
/
15
:
16
·
16
$
17
£
18
22 |
22
¡
24
Display 2
24
25
25
@
25
;
26
=
27
%
&
(
)
+
§
/
:
·
$
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
Display
Control panel
Battery compartment
Marking notches
Status LED (red / green)
Sensor area
Wheel
Hand strap attachment point
On/off button
"Measure" button
Menu button
"Left" arrow button
"Down" arrow button
"Right" arrow button
Service cover
Type identification plate
Signal tone indicator
Battery status indicator
Sensor area indicator (the broken line represents
the outside edge of the tool, for marking the posi-
tion of the object)
Area already scanned
Scale showing approximate depth of the object
Unscanned area
Position of outside edge (for marking a detected
object at one of the lateral marking notches)
Scanning mode indicator
Gray: detected object is outside the sensor area
Black: detected object is inside the sensor area
The center line corresponds with the upper marking
notch
Approximate depth of the object
Object class indicator
en
15