Programming Enables; Altering The Operating Programming Enable - HYDAC ELECTRONIC HNS 3000 Notice D'utilisation

HNS 3000

10 Programming Enables

The unit has 2 programming enables which must both be enabled in order to modify the
settings.
The operating programming enable can be set or cancelled during operation. It provides
protection against unintentional alterations of settings.
A programming disable via the main programming enable prevents any changes being
made to the settings during operation. This serves as a safety function or as protection
against unauthorised alterations for example.

10.1 ALTERING THE OPERATING PROGRAMMING ENABLE

HYDAC
→
0s
mode
Press both arrow keys
simultaneously
(unchanged)
3 s
(changed)
3 s
Version 2018/07/06
→
→
0s
6s
Display
(release
arrow keys)
Fluid level indication
Pressure
indicator
bar
Fluid level indication
Pressure
indicator
3 s
HYDAC ELECTRONIC GMBH
HYDAC
mode
Use the or keys to alter the
settings
FrEE = programming enabled
Loc = programming disabled
Page 18
Part No. 669927