Spare Parts - salmson LRE Instructions De Montage Et De Mise En Service

ENGLISH

12 SPARE PARTS

Available spare parts (see FIG. 9, 10):
Pos. Designation
1.1 Impeller kit
1.11 Impeller
1.12 Washer
1.13 O-ring
1.2 Mechanical seal kit
1.21 Mechanical seal
1.22 Spacer ring
2 Motor LRE
3 Pump housing
3.1 Pump housing
3.3 Changeover valve (DP pump)
4 Screws M6 x 20 (22)
6 Differential pressure sensor
7 Module LRE / JRE
Fault-free operation of the pump can only be
CAUTION!
guaranteed if Salmson original spare parts are
used.
When ordering spare parts, please specify the above spare part
numbers and descriptions together with all relevant data as indi-
cated on the pump and motor rating plates.
57
Subject to technical alterations!