Biral HP 95-100-1/1 Notice De Montage Et D'utilisation page 135

24 English
|
3. The correct direction of rotation is indicated on the
motor fan cover.
5. Bleed the pump with the aid of the bleed valve in
the pump body. At the same time, slightly open the
shut-off valve on the pressure side.
7. Close the shut-off valve as soon as a continuous
flow of fluid emerges.
4. Switch on the pump and check the direction of
rotation.
6. Continue bleeding the pump.
At the same time, open the shut-off valve on the
pressure side a little more.
8. Fully open the shut-off valve on the pressure side.