Safety Precautions - Aprimatic R1-24 Notice D'installation Et D'entretien

Introduction / Safety Standards
INTRODUCTION
ABBREVIATIONS AND SYMBOLS USED IN THIS MANUAL
• p. = Page
• par. = Paragraph
• Fig. = Figure
• Tab. = Table
• min. = Minimum
• MAX. = Maximum
!
Warning
Caution
Information

SAFETY PRECAUTIONS

• Follow the manufacturer's instructions.
• The installation team must check the correct installation and functioning of the equipment.
• Only use the product for the permitted uses specifi ed. Do not use the product for purposes other than those
specifi ed.
• Do not tamper with or modify the product.
• Only use original spare parts.
• Cordon off the working area to prevent the access of unauthorised persons.
• Ensure that the working area is clear of obstacles and the fl oor is not slippery.
• All equipment used must be in good working condition.
• Ensure that the work area is well lit. Ensure that the work area is free from obstructions and health and safety
hazards.
• Do not allow unauthorised persons into the work area.
• Ensure that someone is present in the work area at all times. Do not leave the area and equipment unattended.
This symbol is used to mark information, instructions and procedures which if ignored
could lead to death and serious injury and which could create a long-term health and
environmental hazard.
This symbol is used to mark information, instructions and procedures which if ignored
can cause serious damage to the machine or to the product.
The symbol is used to mark important information which if ignored could void your
warranty.
- 20 -