Maintenance And Care - Winkhaus blueMotion Instructions D'installation

Installation, Operating and
Maintenance Instructions
EN

5 Maintenance and Care

• Components of the door furniture relevant to security have to be checked
for tight-ness and wear at regular intervals. If required, the retaining screws
should be re-tightened and any defective parts should be replaced.
• Check the locking mechanism and smooth operation of the security lock at
regular intervals (at least once every three months).
• At least once a year - more frequently if under a higher stress factor - all
5
moveable parts and all accessible sliding members of the locking system
need to be lubricated with Vaseline (e.g. with the greases Divinol Profilube
SL (spray grease), Divinol F14 EPor Shell Gadus S2 V100) and checked for
proper performance regarding mechanics and electronics.
T-POLFETT 10 GR STÖßEL
• You should only use neutral cleaning agents or care products that do not
contain any abrasives to protect the anticorrosion coating of the door
furniture.
• If you are using the battery, pay attention to the recommended service life.
• Clean electronic parts only in a dry state.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Notice: Grease must be compatible with non-ferrous metals
and plastics.
86
5040239
5044745