Winkhaus blueMotion Instructions D'installation page 154

Installation, Operating and
Maintenance Instructions
EN
3
Installation Power supply (stabilisiert) - Battery - External control unit
green /
yellow
Cable supplied by customer (min. 0,8 mm², e.g. JY(ST)Y 2 x 2 x 0,8,
max. 1 m Length)
Cable supplied by customer (min. 0,8 mm², e.g. JY(ST)Y 2 x 2 x 0,8,
max. 50 m Length)
Mains connection supplied by the costumer 230 V AC, 50 Hz
Figure 3.4-5: Installing the battery - power supply unit - external control unit
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Caution! Use only the provided cable clamps for wiring!
Remove not the existing labels and do not adjust voltage
adjustment! An adjustment of the output voltage is not allowed
because the system is set for a voltage of 24 V DC maximum.
0 V + 2 4 V DC
blue
+ 2 4 V DC
brown / black
50
+ 2 4 V DC
0 V
0 V + 2 4 V DC PFS
5044745
0 V
PFS