Winkhaus blueMotion Instructions D'installation page 150

Installation, Operating and
Maintenance Instructions
EN
No. Name
3
"Open" button, connection of potenti-
al-free contact, e.g. for customer-
specific access control system
** Cable (e.g. 2 x 0,8 mm², max. 100 m
Length)
"Day / Night Service" switch
(contact closed = day service)
** Cable ( e.g. 2 x 0,8 mm
m Length)
Example: Release signal for swing door
openers, for details see section 3.7
Connection of swing door drive or on
request
** no necessary screened cable
Installation of the external control unit with LED display
released / open / accessible
Figure 3.4-4: Installation external control unit with LED
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
MUST!
Manda-
tory *
, max. 100
2
46 5044745
Available Supplied
as on by
accessory customer/
or as on not
option included
in delivery
X
X
X
X
X
The LED indicates that
the door is open, until it is
closed again.
The circuit is made via
the output swing door
drive (Terminals 6 - 8).