Connection Of Swing Door Drive - Winkhaus blueMotion Instructions D'installation

Installation, Operating and
Maintenance Instructions
Figure 3.6.2-3: Setting the K4 relay

3.7 Connection of swing door drive

The application of the blueMotion lock is generally suitable for swing door
drives.
Notice: When using the transponder set blueMotion
"T-STEUERUNG + TRANSPONDERSET T01" no direct control of
swing door drive is possible. Therefor the transponder set
blueMatic EAV (see Figure 3.7-2) must be used.
The lock was specifically tested with swing door drives:
• GEZE TSA 160,
• GEZE Slimdrive EMD
• DORMA ED 200 (control B)
• DORMA CD 80
Wiring plans available on request from Winkhaus and the swing door drive
manufacturers.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
JP1 = ON
K4 ON / OFF
• Relay remains active after being activated
per remote control.
• Deactivation by actuating the remote control
once more.
JP1 = OFF
K4 Impuls
• Relay becomes briefly active after being
activated per remote control and after about
1 sec. it will be deactivated automatically.
57 5044745
EN
3