Cleaning And Care Instructions - Winkhaus panicLock AP4 Instructions D'installation Et D'utilisation

Installation and maintenance instructions
EN

Cleaning and care instructions

Please observe the following notices:
The proper seating and wear and tear of security-relevant
parts of Winkhaus fittings must be checked regularly. If
required, attachment screws must be retightened and / or
damaged parts must be replaced. Lock cylinders and keys
must be replaced, when despite proper maintenance,
malfunctions occur, especially during the insertion or
extraction of the key. At least once every year, and
depending on the frequency of use, all movable parts and
all accessible sliding points of the Winkhaus fitting must
be greased with technical vaseline and checked for proper
functionality.
Heavily stressed sliding parts, such as chamfer of latch and
automatic tracer pins, should be greased or oiled more
frequently where necessary (e.g. quarterly).
For special applications for specially tested door fittings,
e.g. fire protection and panic locking systems, special
regulations apply
inspection / certification standards (e.g. monthly function
check, inspection or annual maintenance), which can be
found in the relevant product documentation. To prevent
a negative effect on the corrosion protection of Winkhaus
fittings, only neutral cleaning and care agents may be
used, which do not contain any abrasives.
Example for lubricant to be used:
T-Polfett 10 GR Stößel.
Alternative:
a) Klüber, Klüberelectric KR 44-22
b) Divinol, Profilube SL
c) Divinol F14 EP
d) Shell Gadus S2 V100
Part description
T-POLFETT 10 GR STÖßEL
Greases must be compatible with non-ferrous
metals and plastics .
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ D-98617 Meiningen ∙ T +49 3693 950- 0 ∙ www.winkhaus.de ∙ Subject to technical changes
in accordance with the
panicLock AP4
relevant
Part-no.
5040239
34 5083118 / 03 / 2021