Installation, Operating and
Maintenance Instructions
EN
1.5 Important safety information
1
Safety information described in this section is to be diligently adhered to
regarding the installation and use of the blueMotion motorised multipoint
locking system.
You are to heed the safety information provided without exceptions!
• Study the installation and maintenance instructions in this operating manual
and keep them in a place where they can be accessed without any problems.
Pass them on to the end customer after having installed the entrance door.
• The manufacturer shall not be held liable for damage caused by use contrary
to the intended purpose of the product.
• For security reasons, the lock has been designed to be used in conjunction
with genuine Winkhaus parts. Using other parts may adversely effect the
given properties of the security lock.
• It must be ensured that the door can be closed without any problems by the
key.
• Installation / repair of electrical equipment requires expertise, thus such work
should only be carried out by on electrician.
• Arbitrary modifications, changes or makeshift repairs are not permitted
due to concerns for safety. You must only use genuine Winkhaus parts for
replacements.
• The manufacturer shall only be held liable for security related properties of
the power lock as stipulated within the bounds of statutory regulations, if the
manufacturer himself or another instructed, authorized agent has carried out
the maintenance and upkeep work or made the changes.
• Winkhaus does not accept liability for any type of damage caused by
inadequate repair, modification or maintenance works made.
• For panicLock blueMotion EN179 / 1125 only panic free to turn cylinders with
FZG anti-barricade function and cam position max. ± 30 ° can be used!
• With panicLock blueMotion (BM) a rechargeable battery with charging
connection (part no. 2121455) is to be installed!
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Caution! The wiring / cable transitions must be installed in the
safe area (e.g. installed concealed in the airgap) and protected
against manipulation.
10
5044745