Winkhaus blueMotion Instructions D'installation page 152

Installation, Operating and
Maintenance Instructions
EN
3
• In another flush-type box you can mount the changeover switch for
day / night service (on customer request).
• If you have chosen to use the Winkhaus wireless receiver can this install it in
the same flush-type box (see installing the wireless receiver).
• Before the door is operated electrically, first test mechanically for ease of
movement!
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Notice: If the external control unit and buttons are placed in the
flush-type box at the same time, they must have a depth of
65 mm!
Notice: If day / night service switch and wireless receiver are
accommodated in the flush-type box at the same time, they
must have a depth of 65 mm!
If several opening options are used at the same time, they must
be switched parallel to the "Open" button (e.g. button from
inside, wireless remote and intercom).
Caution! When connecting on intercom system, make sure that
the intercom system output is designed as a potential-free
contact! No voltage liable to cause interference must reach the
external control unit from the intercom!
The cable length between the buttons and the control unit may
at the most amount to 100 m (2 x 0,8 mm²).
Notice: The motorised multipoint locking system has on error
counter (see chapter 6) for the motorical locking / unlocking
mechanism. This counts warning and error messages, e.g.
sluggishness: 10 x in a row, after that electrically locked
(mechanical operated). Thus, you should make sure the door
opens / closes smoothly from a mechanical standpoint, befor
you use the emergency actuator to test it for easy operation.
48 5044745