Winkhaus blueMotion Instructions D'installation page 202

Installation, Operating and
Maintenance Instructions
EN
Declaration of performance No. 007.2 CPR
1. Unique identification code of the product type:
2. Type, batch or serial number of a different identifier for identification of the construction product accor ding to Article 11,
paragraph 4 of the Construction Products Regulation (CPR):
3. Purpose of use intended by the manufacturer or intended purpose of use of the construction product in accordance with
the applicable harmonised technical specification:
For the use in fire and / or smoke protection doors, which includes a suitable door closing device, to meet the
requirements for such doors in terms of automatic closing and then make sure that the doors stay closed.
For use with fire-protection doors, to get the fire protection of the door system.
4. Name, registered trade name or trademark and contact information of the manufacturer in ac cordance with Article 11,
paragraph 5 of the Construction Products Regulation (CPR):
5. Name and contact information of the authorised person, if applicable, who is commissioned with the tasks in accordance
with Article 12, paragraph 2 (CPR):
6. Systems or systems for the evaluation and inspection of the performance reliability of the construction product in
accordance with Annex V of the Construction Products Regulation (CPR):
9
7. The MPA NRW with the identification number 0432-MPA-NRW of the notified body has carried out the type inspection in
accordance with the specifications of EN 14846:2008 and evaluated and verified the performance reliability according to
System 1, as well as issued the test report.
8. Declared performance:
Significant features
Capability for automatic closing
5.4 Door mass and closing force
Annex A (5.1.2 DIN EN 12209)
Retraction force of the latch
Durability the capability to automatic close
5.3.2 Durability of latch action
Ability for fire / smoke protection doors assemblies
5.5 Ability for fire / smoke protection doors assemblies
5.1.2 Control of harmful substances
9. The product described under sections 1 and 2 fulfils the performances listed under section 8.
This declaration of perfor mance is ussed under the sole resposability of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Meiningen, 05/02/2020
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen ∙ T +49 369 3950 - 0 ∙ tuerverriegelung@winkhaus.de ∙ www.winkhaus.de
T SB February 2020 · EN · All rights reserved.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
blueMotion, Electromechanical lock for doors according to EN 14846
STV-BM, STV-BM EN 179 / 1125
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen-Dreißigacker / Deutschland
System 1
Certificate 0432–CPR–00107-04
(Version: 01)
Class 8: up to 200 kg door mass, 15 N
maximum closing force
≥ 2,5 N
Class S: 200.000 cycles with 50 N load on the
latch
Class C: For use in fire / smoke protection doors
up to the fire protection class 30 min suitable
No harmful substances may be con tained
within or released by this pro duct
ppa. Dr. D. Warnow, Technical Director
98
N / A
Performance
ppa. A. Dinkelborg, Director of Product Management
5044745
Harmonised techni cal specification
EN 14846:2008