Programme Recall; Functions; Description - Hettich ROTOLAVIT Mode D'emploi

EN
14.4

Programme recall

•
Select the desired program position by pressing the
The centrifugation data of the selected program position is displayed.
With selection of the cleaning program, CLEAN PROGRAM is displayed.
•
The parameters can be checked by pressing the
With selection of the cleaning program (CLEAN PROGRAM) no parameters can be verified.
To quit the parameter display, press the
15

Functions

15.1

Description

Washing process
First washing cycle
FILL SPIN DCNT DOWN
*
* the function can be selected or deselected
Display Action
FILL Fill the tubes with saline solution.
SPIN Centrifugation run
DCNT Decanting the excess.
DOWN Centrifugation run to centrifuge the remaining droplets on the side of the tube to the bottom of the
tube.
AGIT Shaking
SUSP Production of a suspension
During a washing process, which consists of several wash cycles, the physiological saline solution is added
successively, the erythrocytes are sedimented by the centrifugation process, and finally the physiological saline
solution is decanted again.
After manually adding the anti-human globulin serum, a further centrifugation speeds up the agglutination test.
The following functions can be selected or deselected:
•
Centrifugation run to centrifuge the remaining droplets on the side of the tube to the bottom of the tube (DOWN).
•
The shaking of the tube at the end of a washing cycle (AGIT)
•
The production of a suspension (SUSP) and/or the shaking of the tube after the production of a suspension
(AGIT).
•
The shaking of the tubes before a centrifugation run that serves to accelerate the agglutination reaction (AGIT).
•
The decanting of the excess after the centrifugation run that serves to accelerate the agglutination reaction
(DCNT).
48/130
or
button.
button or don't press any button for 16 seconds.
STOP
Last washing cycle
AGIT FILL SPIN DCNT DOWN
*
button.
Suspension Agglutination action
*
AGIT SPIN
SUSP AGIT
* * *
DCNT
*