Hettich ROTOLAVIT Mode D'emploi page 53

5. Shaking.
AGIT is displayed.
PROG CYC
ml RPM
1 3 3 0
The steps 1 to 5 are performed until all washing cycles have been performed.
Shaking is only performed if the function is activated. (Global parameter Shakings > "0" or global
parameter ShakeT (min) > "0").
In order not to loosen the pellet, no shaking occurs during a washing process with only one wash
cycle or during the last wash cycle of a washing process.
6. Suspension.
SUSP is displayed.
PROG CYC ml RPM
1 3 3 1100 SUSP
The suspension is only produced if the function is activated (global parameter SuspensionM. =
"YES" and program parameter SalSusp/ml > "0").
7. Shaking.
AGIT is displayed.
PROG CYC ml RPM
1 3 3 0
Shaking is only performed if the function is activated. (Global parameter Susp.Agit. > "0").
•
After completion of the washing procedure or the suspension and with termination of the washing procedure or
the suspension, by pressing the
displayed.
Display after production of a suspension when rotor is stationary:
PROG CYC ml RPM t/ min:s
SUSP. COMPLETE
Display after a washing cycle when rotor is stationary:
PROG CYC ml RPM t/ min:s
WASH COMPLETE
After a washing procedure a centrifugation run for acceleration of the agglutination reaction must be
performed. For this the
The
START WASH
PROG CYC ml
!! PRESS SPIN !!
If a centrifugation run is not desired the
After the first pressing of the
PROG CYC ml
CANCEL? -->STOP
After the second pressing of the
centrifugation data of the selected program position is displayed.
During the run the remaining number of washing cycles, filling volume of the saline solution, the speed of the rotor
and the remaining time of the centrifugation run are displayed.
t/ min:s
AGIT
t/ min:s
t/ min:s
AGIT
key the run-out is performed at a preset brake level. The brake level is
STOP
key must be pressed.
SPIN
key is locked. By pressing the
RPM t/ min:s
STOP
key the following display appears:
STOP
RPM t/ min:s
key the locking of the
STOP
key the following display appears:
START WASH
key must be pressed twice.
key is released and the
START WASH
EN
53/130