Publicité
be placed next to a high piece of furniture or a wall. Coating or veneer used
on fitted furniture must be applied with a heat resistant adhesive (100℃),
this prevents surface deformation or detachment of the coating. If you are
unsure of your furniture's heat resistance, you should leave approximately
2cm of free space around the oven. The wall behind the oven should be
resistant to high temperatures. During operation its back side can warm up
to around 500℃ above the ambient temperature.
Make an opening with the dimensions given in the diagram for the oven to
be fitted The appliance must be earthed.
Insert the oven completely into the opening without allowing the four
screws in the places shown in the diagram to fall out.
INSTALLATION
- 7 -
Publicité
