significant influence on the continuing fault-free operation of your
appliance.
Before you start cleaning, the oven must be switched off and you should
ensure that all knobs are set to the "0"position. Do not start cleaning until
the oven has completely cooled.
Oven
● The oven should be cleaned after each use.
● Cool the oven completely before cleaning.
● Never clean the appliance with pressurized hot steam cleaner.
● The oven chamber should only be washed with warm water and a small
amount of washing-up liquid.
● Steam cleaning
-pour 250ml of water (1 cup) into a bowl placed in the oven on the first level
from the bottom.
-Close the oven door.
-Set the temperature knob to100℃, and the function knob to the bottom
heater position.
-Heat the oven chamber for approximately 30 minutes.
-Open the oven door, wipe the chamber inside with a cloth or sponge and
wash using warm water with washing-up liquid.
● After cleaning the oven chamber wipe it dry
Caution!
Do not use cleaning products containing abrasive materials for the
cleaning and maintenance of the glass front panel.
Replacement of the oven light Bulb
Before any maintenance is started involving electrical parts, the appliance
must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating elements
cool down before attempting any maintenance.
Changing the bulb
- 22 -