Publicité
OPERATION IN CASE OF EMERGENCY
In the event of an emergency, you should:
● Switch off all working units of the oven
● Call the service center
● Some minor faults can be fixed by referring to the instructions given in
the table below. Before calling the customer support center or the service
center check the following points that are presented in the table.
PROBLEM
1.The appliance
does not work
2.The programmer
display is flashing
"0.00"
REASON
Breakin power
supply
Choose wrong
function
The appliance was
disconnected from
the mains or there
was a temporary
power cut.
- 25 -
ACTON
Check the household fuse
box; if there is a blown fuse
replace it with a new
one
Check if function knob.
Temperature knob is set to
the correct position.
Set the current time(see
use of the programmer)
Publicité
