Publicité
Table 4
Error
Engine does
not start
EN
V. 1.1
Troubleshooting
Possible cause
Fuel supply
interrupted
Cable connection
interrupted
Pull-wire starter not
correctly pulled
through
Air filter is dirty
Solution
Ensure that there is sufficient fuel in the
Tank (if the level is too low, the fuel can
collect in a possible sink). Open the fuel
tap (it must point downwards). Remove the
fuel hose from the carburetor and check
whether fuel is coming through the hose
when the fuel tap is open. Clean the fuel
filter. This
may be clogged with impurities. Check the
fuel supply. Cable connections may come
loose during shipping.
All visible cable connections on
check the tight fit. (Cable connections to
motor switch)
Pull the cable through with more speed
and force. Start the device as described in
section "Commissioning", p. 17
Clean the air filter as described in Cleaning
the air filter, page 28
31
Publicité
