Publicité
Disconnect power consumers
• Set the motor switch to OFF.
• Remove the consumer unit.
Switch off
Never stop the appliance abruptly after heavy loads! Allow the generating set
to run for 5-10 minutes without load or only with a very low load to prevent
damage to the windings!
• Stop the motor by setting the on/off switch to OFF.
Risk of burns! The exhaust of the appliance can become very hot during
operation. Never touch the appliance with bare hands during operation. Allow
the appliance to cool down.
If the appliance is to be stored for a longer period of time, it is advisable to dry the
carburetor. See also Drying the storage carburetor p. 29.
EN
V. 1.1
21
Publicité
