Publicité
• Remove the fuel tap using a suitable open-end wrench.
• Unscrew the hexagon nut.
• Unscrew the fuel tap from the thread.
• Check the seal for damage.
• Unscrew the fuel filter from the fuel tap.
• Clean the fuel filter with a dry cloth and short bursts of compressed air.
• Screw the fuel filter back into the fuel tap.
• Screw the fuel tap with seal into the thread.
• Secure the hose.
• Secure the fuel tap again using the hexagon head screw.
• Use the open-end wrench.
If the fuel filter is damaged or cannot be cleaned, replace the filter. See section Spare
parts p.36.
Fuel tap
Fuel filter
Clean spark plug
Clean the spark plug every 100 operating hours or every three months.
• Remove the spark plug cap, Fig. 17.
Spark plug
26
Figure 16
Figure 17
Gasket
Spark plug connector
V. 1.1
EN
Publicité
