Precor Vitality Serie Manuel De L'utilisateur page 66

Apply the Instructional Label, Outside Precor Equipment Label, and
General Warning Label
1. Attach the Instructional label to the inside shroud under the top cap so that
the label is aligned with the left and right edges of the tray on the top cap.
There are small marks on the lower lip of the top cap to indicate the proper
label position.
2. Attach the Precor Equipment label to the outside shroud by centering it
under the top cap. There are small marks on the lower lip of the top cap to
indicate the proper label position.
3. Attach the General Warning label to the right tower frame upright. The top
of the label should be 560 mm (22 inches) above the floor.
Vitality Series Selectorized Line Pulldown Assembly Guide: Assemble the Equipment
Figure 13: Label placement
12