Precor Vitality Serie Manuel De L'utilisateur page 64

Attach the Seat Pad and Thigh Roller Pads
1. Attach the seat pad to the seat post using:
2 – M10 x 30 mm hex bolts
2 – 11 mm flat washers
Note: The narrow end of the seat pad should face the weight tower.
2. Attach the thigh roller pads to the seat frame using:
2 – M10 x 25 mm flat head cap screws
4 – oversized roller pad washers
2 – aluminum end caps
1 – thigh pad axle
3. Install the two set screws to secure the thigh pad axle to the upright
support.
Vitality Series Selectorized Line Pulldown Assembly Guide: Assemble the Equipment
Figure 11: Seat and thigh roller pad installation
10