Precor Vitality Serie Manuel De L'utilisateur page 57

Assemble the Equipment
CAUTION: Proper alignment and adjustment of the equipment is critical. While
tightening the fasteners, be sure to leave room for adjustments. Do not fully
tighten fasteners until instructed to do so.
Make sure the equipment is stable and placed on a solid surface. The equipment
is designed to be freestanding; however, it can be bolted to the floor for extra
stability. Precor highly recommends that the equipment be bolted to the floor to
reduce the risk of toppling the equipment due to improper use. Since floor
construction varies, please consult a professional building engineer for proper
fastening.
Attach the Weight Tower Frame to the Seat Frame
1. Attach the seat frame to the weight tower frame using:
2 – M10 x 100 mm hex head bolts
4 – 11 mm flat washers
2 – M10 nylon lock nuts
2. Attach the upright support to the seat frame using:
2 – M10 x 60 mm hex head bolts
2 – 11 mm flat washers
Partially tighten the fasteners.
Vitality Series Selectorized Line Pulldown Assembly Guide: Assemble the Equipment
Figure 2: Assembly of upright support, weight tower frame, and seat frame
3