Precor Vitality Serie Manuel De L'utilisateur page 58

Attach the Movement Arm to the Weight Tower Frame and Front
Support Frame
1. With assistance, lift the movement arm assembly and place on top of the
weight tower upright. While your assistant holds the movement arm in
place, attach the movement arm to the weight tower frame using:
2 - M10 x 125 mm hex head bolts
4 – 11 mm flat washers
2 – M10 nylon lock nuts
Partially tighten the fasteners.
2. While your assistant continues to support the movement arm, attach the
movement arm to the upright support using:
2 - M10 x 80 mm hex head bolts
4 – 11 mm flat washers
2 – M10 nylon lock nuts
Partially tighten the fasteners.
Vitality Series Selectorized Line Pulldown Assembly Guide: Assemble the Equipment
Figure 3: Installation of movement arm
4