Publicité
9
TEDS CHIPS TRANSDUCER IDENTIFICATION
A TEDS (Transducer Electronic Data Sheet) chip allows you to store the rated outputs of a
sensor in a chip in accordance with IEEE 1451.4. The U10M can be delivered with TEDS
chip, which is then fitted in the transducer housing, connected and supplied with data by
HBM before delivery.
If the force transducer is ordered with a manufacturing certificate, the rated outputs from
the manufacturing certificate are stored in the TEDS chip; if an additional DKD calibration
is ordered, the calibration results are also stored in the TEDS chip. The TEDS module is
designed in a zero-wire configuration. Note that, for TEDS to function correctly, all exten
sions must be executed in a 6-wire configuration. If a suitable amplifier is connected (e.g.
QuantumX from HBK), the amplifier electronics will read the TEDS chip and parameteriza
tion will follow automatically, without any intervention required by the user.
The chip content can be edited and modified with suitable hardware and software.
This can be achieved with HBM's Quantum Assistant or DAQ CATMAN software, for
instance. Please pay attention to the operating manuals of these products.
U10M
64
TEDS CHIPS TRANSDUCER IDENTIFICATION
Publicité
