Publicité
3
SCOPE OF SUPPLY, CONFIGURATIONS, ACCESSORIES
S
Force transducer U10M (metric internal thread)
S
U10M mounting instructions
S
Test report
S
Machine handles for manipulation in the 500 kN and 1.25 MN versions
Configurations
All force transducers are available in different versions. The following options are avail
able:
1. Nominal (rated) force
They are available in nominal (rated) forces from 1.25 kN to 1.25 MN.
1.25 kN
2.5 kN
5 kN
12.5 kN
25 kN
50 kN
125 kN
250 kN
500 kN
1.25 MN
2. No. of measuring bridges
The force transducer is also available with two electrically isolated measuring bridge
circuits.
Single bridge Code SB
Double bridge Code DB
3. Adjusted rated output
On request, we can adjust the rated output of your U10M to exactly match the nominal
rated output. In sensors with nominal (rated) forces of 1.25 kN, 2.5 kN, and 5 kN, the
output signal at nominal (rated) force is then 1 mV/V, in all other force transducers
it is 2 mV/V. These values apply together with 100% calibration (standard). If you
choose the 200% calibration option, the output signal doubles. If you order the
"adjusted rated output" option, the output resistance is always adjusted as well, so
that several sensors can be connected in parallel (exception: Nominal (rated) force
1.25 MN is not suitable for connection in parallel).
Not adjusted
Adjusted
8
Code 1K25
Code 2K50
Code 5K00
Code 12K5
Code 25K0
Code 50K0
Code 125K
Code 250K
Code 500K
Code 1M25
Code N
Code J
SCOPE OF SUPPLY, CONFIGURATIONS, ACCESSORIES
U10M
Publicité
