Publicité
11.Integrated amplifier
The force transducer can also be ordered with permanently connected amplifier mod
ules. When ordering one of the inline amplifier modules, only cable lengths of 1.5 m
and 3 m are available.
Without integrated amplifier
Digital amplifier: IO-Link
12.FW version
If you order the U10M with the VAIO option, the measurement chain is always shipped
with the latest firmware. You can also order the amplifier module with older firmware.
No firmware
Firmware 2.0.0
Accessories (not included in the scope of supply)
Accessory
Configurable cable, including mounted connectors for direct
connection to HBM amplifiers available upon request.
Connection cable KAB157-3; IP67 (with bayonet locking), 3 m long,
outer sheath TPE; 6 x 0.25 mm
outside diameter 6.5 mm
Connection cable KAB158-3; IP54 (with screw locking), 3 m long,
outer sheath TPE; 6 x 0.25 mm
outside diameter 6.5 mm
Loose female connector (bayonet connection)
Loose female connector (screw connection)
Ground cable (400 mm long)
Ground cable (600 mm long)
Ground cable (800 mm long)
Knuckle eye, M16 external thread
Knuckle eye, M33x2 external thread
Knuckle eye, M42x2 external thread
Knuckle eye, M72x2 external thread
Knuckle eye, M16 internal thread
Knuckle eye, M33x2 internal thread
Knuckle eye, M42x2 internal thread
Knuckle eye, M72x2 internal thread
U10M
SCOPE OF SUPPLY, CONFIGURATIONS, ACCESSORIES
Code N - For sensors with analog output signal
Code IO02
2
; free ends, shielded,
2
; free ends, shielded,
Code N
Code VAIO
Ordering number
K-CAB-F
1-KAB157-3
1-KAB158-3
3-3312.0382
3-3312.0354
1-EEK4
1-EEK6
1-EEK8
1-Z4/20kN/ZGUW
1-ZGAM33F
1-ZGAM42F
1-ZGAM72F
1-Z4/20kN/ZGOW
1-ZGIM33F
1-ZGIM42F
1-ZGIM72F
11
Publicité
