Publicité
Error / info
code
Tool communication inconsis-
0001
0002
The brake has a malfunction
0003
0004
0005
0006
0007
0008
0009
The tool is not compatible
0010
Blade motor overload
0011
The incoming power is out of
0012
2092 - 003 - 08.08.2024
Message
tent
The fan is broken
The power pack has an internal error
Communication lost
Blade motor current error
range
Cause
There is slurry inside the tool
and in connectors.
The connection is bad or a
component is broken.
The connection is bad or the
fan is broken.
The connection between the
tool and the power pack is bad.
The tool is not compatible with
the power pack.
The connection is bad or a
component is broken.
The mains power is out of
range.
Action
Clean the tool or replace the
tool.
Speak to an approved Husqvar-
na service center.
Try to restart power pack or test
with a different K6500/K7000.
Speak to an approved Husqvar-
na service center.
Listen if the fan is on when the
power pack is started.
If the fan dosen't start, speak to
an approved Husqvarna service
center.
Try to restart the power pack.
If the power pack is still broken,
speak to an approved Husqvar-
na service center.
Clean the connectors of the tool
and the power pack.
Speak to an approved Husqvar-
na service center.
The tool is not recognized by
the power pack.
Speak to an approved Husqvar-
na service center to update the
power pack with the latest firm-
ware.
Try with a different tool.
Speak to an approved Husqvar-
na service center.
If the power pack is in standby
mode, try to restart the power
pack.
If the power pack is still in
standby, speak to an approved
Husqvarna service center.
Do a check of the mains power
supply.
Speak to an approved Husqvar-
na service center.
47
Publicité
